Branson Tractor Feature Gallery, All Coast Tractor, Alva & Okeechobee, Florida

Feature	Detail
Click any photo to enlarge.	Industrial Tires 25 Series heavy duty, oversize industrial tires. Gives the tractor additional clearance for working in rough terrain. R4 industrial tires fall somewhere in between ag and turf tires as far as aggressiveness but are versatile and rugged and are more forgiving in grassy areas than agricultural tires.
	Turf Tires Turf tires are less aggressive than an industrial or ag tire and best suited for lawn maintenance or other jobs where minimal ground disturbance is a must. All Coast Tractor can provide the best match for your particular projects.
	Brush Guard Clear acrylic brush guard/splash shields help keep the platform clean. It also protects and helps to keep trash off the operator, while allowing good visibility of the front wheel area.
	Hydraulic Fill Hydraulic fluid filler is brightly colored orange, which makes it easy to find and soft so it is less likely to break off.
	Sealed Axles Sealed axles on all four wheels to protect lubricant from water intrusion which will ruin the lubricating quality of the oil. Notice the tie rod bash plate which helps to protect the steering system from damage
	Flat Operator Platform The flat operator platform helps to prevent fatigue from a long day in the seat. No "hump" in the center to trip over. Tilt Steering Wheel Tilt steering wheel is standard on all Branson Tractors.
	Tractor Seat Comfortable seat has spring suspension, slides forward / backward and is adaptable for operator's weight. The high seat position above the floor significantly improves operator's comfort. Of course, a seat belt is provided. Gear shift lever is positioned to the operator's right.
	Quick Disconnect Bucket Single-lever, quick disconnect bucket on 10 and 20 series tractors with no tools required for removal. A variety of other attachments are available including pallet forks, root rake, trash grapple, bale spear and manure fork using the same quick disconnect system which gets you back to work quickly.
	Roll Over Protection System Foldable ROPS is standard on series 10/20/30. It allows you to enter very low buildings for chores or storage.
	Lights The Branson's standard head lights and real work light deliver powerful illumination of the work site. The front lights have a selectable high and low beam, same as a car.
	Turn Signals and Work Light There are also standard backup lights which turn on automatically when the shuttle shift lever is in reverse as well as a manually operated spot light to keep an eye on towed implements in low light conditions. Turn signal/brake lights let you signal your intentions when on the road and are also used with the four-way flasher.
	Shuttle-Shift The standard shuttle shift makes it possible to go forward and reverse at about the same speed—a great advantage for front loader work. The large capacity synchronizer allows easy shifting, even if the tractor does not come to a full stop—just depress the clutch pedal and move the shuttle shift lever. The left location of the shuttle shift leaves the right hand free to operate the loader controls.
	Saddle Fuel Tanks The 11 gallon fuel tank allows you to work most of the day without a refill. Notice that the positioning of the fuel filler makes it easy to reach and keeps fuel well away from the operator's position.
	Heavy Cast Iron Components Looking at the rear of the tractor, notice the heavy cast iron frame, unlike the competition. More weight results in more traction when it counts. Seven-pole electrical socket supplies power to trailers and implements. Socket is installed on series 10/20/30. Optional remote hydraulic outlets are available.
	Sub Frame Mounted Loader The heavy duty loader is mounted right to a sub frame on the tractor and is attached to the sub frame in six different places to distribute the load and stresses of loader work. Quickly remove the loader by releasing two pins and backing away. Then unplug the hoses.
	Heavy Duty Loader The heavy duty loader features a bucket level indicator and six mounting points (front, middle & rear on each side) for strength with easy access for servicing and greasing. But, it is quickly removed without using any tools.
The standard Draft Control on series 20/30 improves productivity and job quality with tillage equipment and blades. Optional single or dual remote hydraulic set. Use it to operate an implement cylinder, or to supply oil to the backhoe and save on expensive pump kits normally required to run the backhoe. See below	3-Point Hitch Detail The PTO shift lever on series (10/20) selects either 540 or 1000 PTO rpm, for total compatibility with any current or future implement. The all-mechanical transmission is very efficient, so the power loss between the engine and PTO is kept to a minimum. After all, it is the PTO where you need the horsepower most. High capacity, live hydraulic pump is large enough to efficiently run the front loader and a backhoe. The steering system uses a separate pump, so all the oil from the main pump is available for the three-point hitch or for the loader all the time. Both hydraulic pumps are mounted externally so they are easily accessible.
	Separately adjustable drag links for easy hookup The three-point hitch is compatible with any Category l or 2 implement and is standard on series 20/30. Convenient, crank-operated leveling adjustment. Note: Standard features described here are optional on 10 Series tractors. More about Branson Tractors